Aqara High Precision Human Body Sensor Motion Sensor Zigbee 3.0 Wireless Smart Movement Waterproof Smart Home For HomeKit APP

説明レビュー

Aqara High Precision Human Body Sensor Motion Sensor Zigbee 3.0 Wireless Smart Movement Waterproof Smart Home For HomeKit APP

Basic Parameter

Brand: Aqara

Product model: RTCGQ13LM

Product size :74 x 74 x 43.3mm

Sleeve size :113 x 113 x 41mm

Wireless connection to : Zigbee 3.0

Battery model: CR2450

Implement standard :Q/QLML002-2020

Operating temperature :-10°C-+35°C

Operating humidity: 0 to 95%RH, non-condensing

Detection distance: 5m

The detection Angle is about: 60°conical

Circle with a diameter of: 6m (at a distance of 5m)

Q&A

How do I determine if the sensor is connected to the gateway?

Press the reset button of the human sensor. If the gateway plays the prompt tone "Connection is normal" or "beep", the communication between the sensor and the gateway is normal.

If no prompt is displayed, reconnect the sensor to the gateway. If no prompt tone is displayed, the sensor battery may be exhausted. Replace the battery and try again.

Where should the sensor be installed?

1, installed in the need to detect whether there are people in the area, such as living room, bedroom;

2, can be used to install the top or wall mount two ways;

3. Please place it on the metal surface by mistake.

Does the pet trigger the sensor?

Yes, even weak signals from pets can be detected.

What is the reason for the sensor connection failure?

1. The device may be too far away from the gateway. Move the sensor closer to the gateway and add the device again.

2. Ensure that the gateway is connected to the network.

What are the possible reasons for the sensor to be offline?

1. The device is too far away from the gateway.

2. The battery is low or dead.