Packing list :
1* clip
Real Photo Show :
5.Afterwards, pull storage battery plug from start power supply and remove clip from auto battery.
4.If the auto can not be started, turn the key after several seconds until it is started successfully.
3.Turn auto key to start shift to start auto.
2.Insert plug of battery clips into start outlet of start power.
1.Connect the red and black battery clips to the positive and negative of car battery.
Instruction:
5.Anti High Temperature Start:When the temperature of the jump starter is higher than 80 Centigrade,the smart cable will prevent the current flow,to protect the jump starter
4.Anti Reverse polarity protection:Reverse connection with the Negative and positive end of the clamp and battery terminal,No damage, no sparkle
3.Anti-reverse charge protection:After the car is started,Anti-reverse charge current is less than 1A
2.Anti Over-discharge protection:Low voltage start,LED will flash at the frequency of 1HZ if the voltage is below 10.5V
1.Anti Short connection protection:Connect the red clip with the black clip when the power is on,No damage,no sparkle
Functions:
Red for "+", black for "-"
2. if your jump starter has power, but only 3 built-in batteries, our clip cable will warn with beeping too, please connect with jump starter that has 4 built-in batteries .
1. if your jump starter without enough power, after connect with our clip cable, it will warn with beeping .
Please note ( For Smart battery Clip ) :




NEW arrival LED Display Smart Battery Clips For 12.5V Car Jump Starter Hot Sale Connector Emergency Jumper Cable Intelligent Clamp Booster
Please note:
1. if your jump starter without enough power, after connect with our clip cable, it will warn with beeping
2. if your jump starter has power, but only 3 built-in batteries, our clip cable will warn with beeping too, please connect with jump starter that has 4 built-in batteries
real picture:





